AeroCheck Çift Frekanslı Eddy Current Hata Dedektörü

AeroCheck Çift Frekanslı Eddy Current Hata Dedektörü

AeroCheck+ çift frekanslı eddy current test cihazımız, iki frekansın otomatik birleştirme özelliği, iletkenlik ölçümü ve 20 Hz ile 12.8 MHz çalışma aralığı ile üstün eddy current test cihazımızdır. Reflection, Bridg, Aboslute ve Rotary problarının tamamı sistemimizde kullanılabilmektedir. 5.7" LCD reknli ekranı, 1.2 kg ağırlığı ve 10 saat batarya ömrü ile tam bir portatif eddy current test cihazıdır.
  • TEKNİK ÖZELLİKLER

 


 

AeroCheck2

AeroCheck+

Probe 

Connectors

12 Way Lemo 2b (Absolute, Bridge and Refection) and Connection Lemo 00 (for single element absolute probes) 

Simultaneous probe operation possible using Lemo 12 way and Lemo 00

Rotary 

600-3000 rpm - ETher Mercury Drive (ADR002), Hocking 33A100, Rohmann MR3, SR1 and SR2 Drive (special adapter needed) 

Frequency 

 

Single Freq. = 10Hz – 20MHz with range variable resolution 

Dual Freq. = 10Hz - 12.8MHz & Mix -18 to +18dB on output 

Gain 

Overall

-18 to + 104dB, 0.1, 1 and 6dB steps (104dB maximum) 0dB or 12dB0dB, 6dB and 10dB (0dB reference 1mW into 50 ohm). +/-100.0 dB 

Input Gain

 0dB or 12dB

Drive

0dB, 6dB and 10dB (0dB reference 1mW into 50 ohm)

Max. X/Y Ratio

 +/-100.0 dB

Phase 

Range 

0.0-359.9°, 0.1° steps

Auto Phase 

Allows phase angle to be automatically set to a pre set angle 

Filters 

Normal High Pass

DC to 2kHz or Low Pass Filter, which ever is the lower in 1 Hz steps. Plus variable adaptive balance drift compensation 0.01 - 0.5 Hz (6 steps)

Normal Low Pass

1Hz to 2kHz or a quarter of the lowest test frequency, which ever is lower in 1 Hz steps. 

Balance 

Manual

14 internal balance loads; 2.2μH, 5.0μH, 6.0μH, 6.5μH, 7.0μH, 7.5μH, 8.2μH, 12μH, 15μH, 18μH, 22μH, 30μH, 47μH, 82μH

Automatic

Optimised balance load selection

Alarms 

Box Sector Output 

Fully configurable, Freeze, Tone or Visual..

Sector

Fully configurable, Freeze, Tone or Visual

Output

Open collector transistor (32v dc at 10mA max) available on 12 way Lemo

Display 

Type

5.7” (145mm), 18 bit Colour, daylight readable

Viewable Area

115.2mm (Horizontal) x 86.4mm (Vertical) 

Resolution 

640 x 480 pixels



Flip

Manual or automatic screen orientation change to enable left or right handed use

Colour Schemes Configurable 

User configurable Dark, Bright and Black & White

ScreenDisplay Modes 

Full Screen, Single, Dual Spot or Dual Pane with variable size and location and function e.g. MY, Timebase, Waterfall and Meter.
Spot, Time base (0.1-20 seconds x 1-200 sweeps and up to 55 seconds), Waterfall and Meter with peak hold and % readout

Graticules 

Choice of Grid (4 sizes 5, 10, 15 and 20% FSH), Polar (4 sizes 5, 10, 15 and 20% FSH) or none

Offset

Spot Position: Y =-50 to +50, X =-65 to +65%

Digital Spot Position Readout

Display in X,Y or R,θ

Summary

Legacy Format

Removable Data Storage 

Setup

micro SD up to 32GB, holding over 10,000 settings  

Stored Screen Shots 

micro SD up to 32GB, holding over 10,000 screen shots

Record/Replay

Comprehensive Record Replay and Storage. Realtime recording of trace data and Replay on instruments and desktop PC up to 164 seconds 

Outputs 

PC Connectivity 

USB (Full PC remote control plus Real Time data)

Digital Volt Free Alarm

Available on Lemo 12 way, Open collector transistor (36v dc at 10mA max)

VGA

Full 15 way VGA output 

Languages 

 

English, French, Spanish, Italian, Portuguese, Russian, Japanese, Chinese, Turkish, Czech, Norwegian

Verification Level

 

The system includes on delivery a 2 year validity Verification Level 2 detailed functional check and calibration as per ISO 15548-1:2013 

Power On Self Test 

 

The system performs a self test on start up of external ram, sd ram, accelerometer, Micro SD card, LCD screen buffer. 

Power 

External

100-240 v 50-60Hz 30 Watts

Battery

Internal 7.2V nominal @ 3100mAh = 22.32 watch 

Running Time

Up to 8 hours with a 2MHz Pencil Probe 30% Back Light and up to 6 hours with a Rotary Drive at 3000rpm 50% duty cycle

Charging Time 

 2.5 hrs. charge time -  Simultaneous charge and operation possible

Physical 

Weight

1.2 kg, 2.7 lbs

Size (w x h x d) 

237.5mm x 144mm x 52mm / 9.4” x 5.7” x 2.1”

Material

Aluminium alloy Mg Si 0.5 powder-coated

Operating Temperature

-20 to +60 °CStorage for up to 12 months -20 to +35 °C Nominal +20 °C

Storage Temperature

Storage for up to 12 months -20 to +35 °C Nominal +20 °C

IP Rating 

54

 

 

Conductivity Specification + version only

 

Frequency 

One frequency only 60kHz standard (choice of 120, 240 and 480kHz) 

 
 

Resolution 

3 decimal points max

 

Auto Resolution Mode AutoS = Legacy Instrument, Auto = SigmaCheck 

 

 

Acccuracy             

0.5%-10% IACS better than +/-0.05% IACS 10%-25% IACS better than +/-0.25% IACS 25%-60% IACS better than +/-0.5% IACS 60%-110% IACS better than +/-1% IACS Lift Off corrected to 1.0mm No temperature compensation All Errors at 90% Confidence Level 

 

 

  • İLGİLİ ÜRÜNLER
  • İLGİLİ ENDÜSTRİLER